Book
printing involves a lot of knowledge. A
professional printing factory must
know how to maintain the equipment. Let us discuss how to save the printed
blanket
1) The blanket should be stored in a cool,
dry environment, and away from heat sources, avoid direct sunlight, to prevent
aging desulfurization. In order to ensure good air circulation, each blanket
should be hung on the mast. If the warehouse is narrow, the blanket should be
placed flat, and no heavy objects should be placed on it. The blanket should
not be rolled into a cylinder when it is best preserved.
2) Open the package of the blanket and
remove the protective cover. Carefully check the blanket for damage. It is not
advisable to load the new blanket directly onto the machine. Since the blanket
is packaged in a roll, it should be laid flat for a period of time so that it
can be flattened before it can be used on the machine.
3) If a lot of blankets are stacked, the
blankets should be stacked face to face or back to back, otherwise the fiber
texture on the back of the blanket will affect the flatness of the surface of
the other blanket.
4) Do not squeeze the blanket to avoid
breaking the blanket or destroying its elasticity. The blanket is afraid of
light and heat and humid air. They will cause stickiness, skinning, cracking,
hardening and other defects on the surface of the blanket. .
5) The warehouse where the blanket is
stored should be ventilated and dry, the relative humidity is about 70%, and
the temperature is about 24 °C. Keep the blanket from contact with acid and
alkali, oxidant and petrochemical products to avoid chemical attack on the
blanket.