1.
Text on the printed page of the catalogue must be cut from the edge more than
3mm, to avoid cutting. The text must be curved or drawn out. Do not use system
words, if used will cause stroke interlaced white nodes. After the text is
turned into a curve, please note whether there is a jump or overlap between
words or lines. If there are white nodes in the stroke interlaced, it can be
processed with scattered instructions. Do not use overprint color for black
text for catalogue printing in
China.
2. The same document is
printed differently in different time, the color difference is normal within
10%(due to different ink control).
3. color printing can not be required by screen or printer printing color,
customers must refer to the CMYK when making catalogue printing in China
The percentage of chromatography determines the color
filling.
4. color printing, color block color matching please
avoid the use of dark or full color combination, otherwise printing is easy to
produce back printing.
5. Catalogue printing shading or shading color should
not be less than 10 to avoid printing finished products can not be presented.
6. Print all input or
self-drawn graphics 6. the album, the wire frame thickness must not be less
than 0.1 mm, otherwise the print will cause broken or unpresentable conditions.
In addition, the wire frame can not be set "zoom with image ",
otherwise printing output will form irregular lines of catalogue
printing in China.
7. when the object of the progressive layer is placed
in the frame, it should be transformed into a lattice diagram, because the
direction of the gradual layer does not rotate together with the other object
groups. In addition, no gradient object can be set "edge width ",
because the output machine interpretation is different, sometimes resulting in
the gradient edge color filling.Do not need to draw cross and cut lines.
8. The completion of the manuscript. Two invisible
wire frames can be used as making dimensions and bleeding lines.
9. Pay special attention to any picture, color block or line beyond the
size of the frame should be placed. Do not use white color block cover, so as
not to cause problems when the plate