The maintenance of Offset machine
11-15-2017 14:10:32

The offset press is the core equipment of the printing factory and is one of the most utilized equipment in all the equipment of the printing factory. In order to ensure the normal operation of the offset press, it is necessary to maintenance. Meanwhile, the maintenance of offset printing press is also an important task in printing equipment management.
Three maintenances
Usually, the maintenance of the offset printing machine mainly includes the first grade maintenance, the second grade maintenance and the third grade maintenance.
The first grade maintenance
The first grade maintenance that is routine maintenance, daily by the offset press operator maintenance, requiring each shift operator must do.
Check and lubricate the equipment before class, strictly follow the operation procedure in the class, carefully clean and test the equipment after class, and record the operation status of the equipment on the shift. Primary maintenance is the foundation for the maintenance and maintenance of the offset press, which is a regular work in the operator's part, which has the same significance as completing the production task.
The second grade maintenance
The second grade maintenance works mainly by the offset press operator, the maintenance staff, according to the requirements of the secondary maintenance rules, the maintenance work carefully. Level 2 maintenance is a planned maintenance work, demand for local equipment and key parts as planned disassembly, inspection, including oil, cleaning replace oil filter, check the wear situation, part of the electrical maintenance, etc. After the completion of secondary maintenance, the records should be recorded and the problems that have not been solved should be paid close attention.
The third grade maintenance
The third grade maintenance to offset press maintenance personnel, operator supplemented, according to the three maintenance requirements carefully equipment maintenance work, its content, including the three maintenance content, but also for electrical maintenance, replacement of worn parts, Oil change for mechanical parts, refueling for motors and more. After the third-level maintenance is completed, the maintenance personnel should fill in the records in detail and submit them to the shop for acceptance and archiving. The main purpose of the three maintenance is to make the equipment meet the standards, improve and consolidate the equipment intact rate, extend the life cycle.


[Go back Menu]